Mandatory Specifications

1. To work over in. diameter shaft

2. OUTSIDE DIAMETER
in. +/- in.

3. INSIDE DIAMETER
in. +/- in.

4. Torque in.• lb. +/- in.• lb. @

5. Length of space available in.

6. Maximum wound position turns
    or degrees from free position.

7. Length of movement arm (R) in.

8. Direction of helix Optional Right Left

9. Type of ends Straight Torsion Ends Straight Offset Ends Short Hook Ends Hinge Ends Special Ends Double Torsion

Special Information

1. Type of Material

2. Finish

3. Frequency of movement (cycles/sec)

5. Operating temp.
degrees F

Advisory Data

1. Wire diameter in.

2. Mean coil diameter in.

3. No. of coils

4. Rate in.•lb. per turn(360 degrees).

5. = degree free angle reference.
    (see diagram at top)

6. End use or application

7. Other Information